New model of Audi A6L/A8L/Q7 with electronic parking brake system, rear brake cylinder with electronic parking brake motor, cannot compress motor manually, must through withdrawal and release of vehicle code reader. Operation steps:
1, Connect Fcar Audi code reader 2, Turn on the ignition switch; 3, Select ”Parking brake”; 4, Select ”Basic adjust”; 5, Input matching value”007”; 6, Remove tire and replace 2 rear wheel new brake pads; 7, Select “Basic setting”; 8, Input matching value “006”; 9, Clear DTC, turn off ignition switch; 10, Exit Audi code reader software and complete. If it’s Audi A8L, then need to input thickness of brake pad; A6L don’t need. Operation method: 1, Connect Fcar Audi code reader 2, Select “Adjust” 3, Input channel No.“006” 4, Input new matching value ? Namely the thickness of brake pad, can be measured with caliper, normally the thickness of new brake pad is 12; 5, Input matching value“12”; 6, After confirm, the screen will show “matching successful” 7, Clear DTC; 8, Turn off ignition swtich; 9, Exit car computer scanner software and complete. fcar.com |